ADE Captiv8-20 Instruções de Operação descarregar pdf (Página 4)

Full Set using the Manager code

The system can be fully set using the manager code,

the procedures are slightly different to that when using

a normal user code.

Key in the manager code at the keypad

nearest the final exit door.

Press

If Part Set programs B or C are enabled then the

display will ask you to select how you would like your

system set.

Press the key to select Program A to fully

set the system. If no attempt is made to press the A

key the system will automatically select Full Set

Program A.

The exit period will start and the inside sounder will

produce the exit sound - a pip-pip-pip sound.

You must now vacate the premises by the exit route

described in the System information. The length of

time that you have to vacate the premises depends on

the exit mode that has been programmed. Check your

System Information to find out the exit mode of

program A.

Part-Set the System

A part-set allows detection zones in part of the

protected premises to be set (turned on), while those

in other areas are not set. In a domestic installation it

is usual for a part-set to be programmed for use at

night time. This would allow the detection zones

around the perimeter of the house (doors, windows,

etc), and all downstairs detectors to be enabled, while

detectors in the bedrooms and on the stairs and

landing are disabled.

Captiv8-20 has 2 different part-set programs called B

and C. Check your System Information to see if these

programs have been enabled. If they have not been

enabled then you will not be able to use them.

If a part-set has been enabled you can part-set your

system by doing the following: Enter your code at a

keypad or alternatively present the

proximity tag to the keypad. The display will ask you

to select how you would like your system set.

Within 5 seconds of entering your code you must

press either the or key to select

one of the part-set programs. The display will

acknowledge this by displaying name of the program

being set.

The bottom line on the display may have been edited

during installation to read a different message, for

example it may read NIGHT TIME. Leave the

protected area by the exit route appropriate for that

part-set.

Operating instructions

System Set

SelectABorC

**SYSTEM SET**

ENTER

1) Set system?

Ent to Set

System Set

SelectABorC

Intelligent Security & Fire Ltd

1 2 3 4 5 6 7 8 9 ... 27 28

Comentários a estes Manuais

Sem comentários

ADE Captiv8-20 Instruções de Operação Página 4

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso ADE Captiv8-20