ADE Accenta G3 Especificações descarregar pdf (Página 22)

Accenta/Optima Engineer’s Manual

Menu Options

The full menu structure for the panel can only be accessed while in Engineer program mode. The structure is

shown in the following table:

Table 2. Menu Options

Menu Options

MENU OPTIONS

0 = Walk Test 7 = Timers

1 = Alarm Test 8 = Codes

2 = Test Outputs C = View Event Log

3 = System Flags O = Omit Allow & Double Knock

4 = Time and Date P = Set up Programs

6 = Zone Names

Enter Engineer program mode. Press [PROG] [9] [9] [9] [9].

0 = Walk Test

The walk test function allows each detector to be checked in order to verify that they are functioning correctly.

A tone is generated as each zone is activated (opened).

LED keypad

• Press [0] for menu Walk Test.

• Press [SET]. Zones 1-8 are off

• When a zone is sucsessfully tested, the LED is on.

Zones are added to list as each one is activated.

• The Tamper LED comes on when tested.

• Press [RESET] to leave the menu or [SET] to restart

the Walk Test.

LCD keypad

• Press [up arrow] for menu Walk Test.

• Press [SET] or [0]. Zones 1-8 have a zero (0)

below each number.

• When a zone is sucsessfully tested, number 1

replaces the 0. Zones are added to list as each

one is activated.

• Press [RESET] to leave the menu or [SET] to

restart the Walk Test.

0>Walk Test0>Walk Test

0>Walk Test

[up arrow]

[SET] or [0]

[RESET]

0>Walk Test0>Walk Test

0>Walk Test

12345678 TP12345678 TP

12345678 TP

00000000 0000000000 00

00000000 00

[SET]

[RESET]

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 55 56

Comentários a estes Manuais

Sem comentários

ADE Accenta G3 Especificações Página 22

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso ADE Accenta G3